Bandsaw Blades for Custom Fabrication and Welding Shops
Fab shops cut more feet of mild steel than anyone: tube for frames, flat bar for brackets, angle for everything. The right blade here is the one with the lowest real cost per cut that still leaves a square face ready for fit-up. That is what we spec, weld in Hamilton, and ship across Canada.
What Slows These Shops Down
Volume on a budget
Hundreds of cuts a week in ordinary steel. The Sprint Plus line delivers German quality at a price built for exactly this work.
Square cuts save weld wire
A drifting blade leaves gaps that get filled with weld metal and grinding time. Fresh sharp blades at the right tension keep joints tight.
Every saw is different
Fab shops run whatever saw came with the building. We weld any loop length, so your Ellis, Hyd-Mech, or no-name import gets a proper blade.
What We Cut For This Industry
- Mild steel tube and HSS
- Flat bar and angle
- Sheet and plate strips
- Round bar
- Aluminum extrusion
- Stainless trim sections
Blades We Recommend
Sprint Plus M42
The fab shop default. Honest M42 bi-metal at the best cost per cut in the range for everyday mild steel.
X-FIT M42
Upgrade when the mix includes alloy, stainless, or heavy sections alongside the daily mild steel.
CS-1 Carbon
Carbon blade for light-duty saws, aluminum, and thin material where bi-metal is overkill.
Custom Welded In Hamilton
Every blade is loop welded to your machine's exact length at our Hamilton, Ontario facility and shipped across Canada and worldwide. Find your machine's spec or configure a blade now.
Find Blades For Your MachineFrequently Asked Questions
Why is my blade cutting crooked?
Dull blade, low tension, or worn guides, in that order of likelihood. If a new blade at proper tension still drifts, the guides need attention; our millwrights can sort the saw. Never push a dull blade harder to keep it cutting straight.
How long should a blade last in a fab shop?
On clean mild steel with the right pitch and feed, months of daily cutting is normal for Sprint Plus. If you are changing blades weekly, something is wrong with the spec or the saw, and either one is fixable.
Can you beat the blades from the welding supply counter?
On cost per cut, almost always. Counter blades are generic stock lengths; ours are German Arntz coil welded to your exact saw. Try one blade and compare cuts. Simple as that.