Arntz Engineered Cutting Systems
Custom Welded Bandsaw Blades
German Arntz coil stock, welded to any length in our Hamilton shop. Start with your saw or with what you're cutting.
Need a Custom Length?
You aren't restricted to standard sizes. Simply choose your blade type, enter your machine's exact loop length during configuration, and we will weld it.
Choosing the Right TPI
For optimal cutting performance and blade life, ensure that at least 3 teeth are engaged in your material at all times. Thinner materials require a higher TPI (e.g., 8/12), while thick solids require a lower TPI (e.g., 2/3).
SILVER-LINE N
CARBIDE-TIPPEDNon-Ferrous/Special Materials
The Arntz SILVER-LINE N is the carbide-tipped bandsaw blade for surface hardened workpieces. A negative rake angle lets the carbide teeth enter case-hardened, induction-hardened and nitrided surfaces without chipping, then the multi-chip geometry carries the cut through the softer core.
Special blade with negative rake angle for hardened surfaces
Multi-chip carbide geometry for highest cutting performance
Available in 27mm, 34mm, 41mm and 54mm widths with 2/3 and 3/4 TPI
Custom loop-welded to your machine's exact length in Hamilton, Ontario