Arntz Engineered Cutting Systems
Custom Welded Bandsaw Blades
German Arntz coil stock, welded to any length in our Hamilton shop. Start with your saw or with what you're cutting.
Need a Custom Length?
You aren't restricted to standard sizes. Simply choose your blade type, enter your machine's exact loop length during configuration, and we will weld it.
Choosing the Right TPI
For optimal cutting performance and blade life, ensure that at least 3 teeth are engaged in your material at all times. Thinner materials require a higher TPI (e.g., 8/12), while thick solids require a lower TPI (e.g., 2/3).
CS-1
CARBONGeneral / Multipurpose
The Arntz CS-1 is a German-engineered carbon bandsaw blade built for everyday workshop cutting. Featuring a flexible band back in pin-point quality with hardened teeth, the CS-1 delivers reliable cuts through mild steel, low-carbon steel, and non-ferrous metals. Available in widths from 3mm (1/8") to 32mm (1-1/4") with tooth pitches from 2 to 32 TPI. Standard tooth (0°) and hook tooth geometry options. Custom loop-welded to your exact blade length at our Hamilton, Ontario facility.
SILVER-LINE
CARBIDE-TIPPEDNon-Ferrous/Special Materials
The Arntz SILVER-LINE is a carbide-tipped bandsaw blade with a complex multi-chip geometry built for the highest requirements: fast band speeds, non-ferrous and special materials, stainless steel and large solid sections where cut rate matters.
Multi-chip carbide tooth design for high cutting performance
Developed for fast band speeds on production saws
High positive rake angle to increase penetration
Available in 27mm, 34mm, 41mm and 54mm widths with 2/3 and 3/4 TPI
Custom loop-welded to your machine's exact length in Hamilton, Ontario