Arntz Bandsaw Blades

Please contact us for pricing

M42 Star

Allrounder for solid, small dimensioned materials.
 
  • Common steel qualities and non ferrous metals
  • Short-chipping materials
  • Small structurals with thin walls
  • Narrow cross sections up to approx. 100 mm (4")
  • Contour cutting operations

M42 Star Plus

The saw blade for medium sized solid materials.
 
  • Small workshop bandsaws
  • Common steel qualities and non ferrous metals
  • Cross sections over approx. 100 mm (4")

M42 X-Fit

The multi-purpose blade for small and medium cross sections.
 
  • Profiles and beams
  • Mixed cross sections including solids

M42 Alucut-Sprint

Easy cutting through light metals.
 
  • Pure aluminium and aluminium alloys
  • Solid material and structurals

M42 Sprint

The fabrication professional for light and medium wall thicknesses.
 
  • Structurals with light or medium walls
  • Short chipping materials
  • Sheet metal on vertical band saw machines

M42 Sprint-Plus

Perfect for materials of medium to large dimensions.
 
  • Production band saw machines
  • All purpose use for steels and non ferrous metals
  • Tensile strengths of up to 1400 N/mm²
  • Thick walled structurals

M42 Profiler-Sprint-VS

Robust performance for steel construction.
 
  • Large cross-section steel beams
  • Structurals with residual stress

M42 Taifun-Sprint

Excellent for use on high-performance band saw machines.
 
  • Stainless steel
  • All-purpose use for steels and non-ferrous metals
  • Tensile strengths of up to 1400 N/mm²
  • Thick walled structurals

M42 Taifun-Maxima

Perfect for cutting tough materials and alloys.
 
  • Long chipping materials
  • Stainless steel
  • Titanium alloys
  • Special bronzes
  • Copper alloys
  • Nickel based alloys
  • Exotic alloys, difficult to cut

M51 Sprint-Plus

Wear resistant teeth for difficult to cut materials of medium dimensions.
 
  • Hard and tough materials up to 1700 N/mm² tensile strength
  • Stainless steel
  • Nickel based alloys
  • Titanium and special bronzes
  • Thick walled structurals

M51 Taifun-Maxima

Extremely wear-resistant, ground teeth for the most difficult cutting conditions.
 
  • Hard and tough materials up to 1700 N/mm² tensile strength
  • Stainless steel
  • Nickel based alloys
  • Titanium and special bronzes
  • Thick walled structurals

Blue-Line

Carbide tipped band saw blades with triple chip geometry for cutting non-ferrous metals and graphite.
 
  • Aluminium alloys
  • Aluminium bronzes
  • Copper alloys
  • Sand cast aluminium and cast magnesium
  • Graphite

Silver-Line

Carbide tipped band saw blades with patented multi chip tooth geometry for cutting high-alloy steels and non-ferrous metals.
 
  • Stainless steel
  • Cold and hot working steels
  • Hardened steel up to 1900 N/mm²
  • Nickel based alloys
  • Aluminium-silicon alloys
  • Copper-nickel alloys
  • Titanium and titanium alloys
  • Exotic, hard to cut alloys

Silver-Line-N

Carbide tipped band saw blades with multi chip tooth geometry, negative rake angle for cutting extremely hard or surface hardened materials.
 
  • Induction hardened piston rods
  • Steels hardened up to 62 HRC
  • Hard chromium plated materials
  • Manganiferrous alloyed steels

CS-1

Flexible band back in pin-point quality with hardened teeth. Suitable for everyday workshop purposes.